Forestry jacket made of strong and ventilating 4-way RipStop stretch. The material is stretchable in all directions which provides for great comfort. Reinforced in Aramid material on exposed areas. Four pockets with waterproofed zips which keeps the inside free of water and dust. Inner pocket for mobile phone. The two upper pockets can also be opened for extra ventilation. Designed with easy adjustments in waist and lower part of the back. Smart construction of cuffs for extra ventilation and longer sleeves for greater freedom of movement. Open yoke at the back, collar of corduroy and Jonsered logo on chest. Recommended washing temperature 40° C.

Protective trousers 20, waist model, are made of strong and ventilating 4-way stretch. The material is stretchable in all directions which provides for great comfort. Reinforced in Aramid material on exposed areas. Light and comfortable trousers due to to our new lighter saw protection material. Lining in Spacermaterial and extra ventilation openings on back of legs makes the trousers airy. Two front pockets and two back pockets. The back pockets can also be opened for extra ventilation. Wide elasticized waist and a raised back. Recommended washing temperature 40° C. EuroTest marking. Model A.

Protective trousers 20 in carpenter's model are made of strong and ventilating 4-way stretch. The material is stretchable in all directions which provides for great comfort. Reinforced in Aramid material on exposed areas. Light and comfortable trousers due to to our new lighter saw protection material. Lining in Spacermaterial and extra ventilation openings on back of legs makes the trousers airy. Two front pockets and two back pockets. The back pockets can also be opened for extra ventilation. Roomy bib and back for extra comfort. The bib has two pockets with zip and one inner pocket for a mobile phone. Adjustable braces. Recommended washing temperature 40° C. EuroTest marking. Model A.

Saw protection trousers in class 2, fulfils tests for chain speeds up to 24 m/s. Made of tough Cordura nylon at front and ventilating polyester at back of trousers. Zipped pockets at the front and back. Euro Test marking. Available as waist trousers in sizes S-XXL.

Hard-wearing forestry jacket. The lower part of the sleeves is reinforced with extra durable Cordura nylon. Yoke of 100% water-repellent, lightweight, tear-resistant Ultra polyester. The rest is 80% polyester and 20% cotton. Two zipped front pockets. The right-hand one is a Napoleon pocket. The left-hand pocket has an inner pocket for a mobile phone. Adjustable elasticated sections at waist and at base of back. Yoke is open at the back with mesh lining for good ventilation.

Protective trousers with approved saw protection. Generously proportioned at the back for improved freedom of movement. Three zipped pockets and a wide elasticated waist. Front section of extra durable Cordura nylon, the rest of 100% Ultra polyester. Fulfils requirements of EN 340 class 1, 20 m/s. Approved for industrial wash.

Protective trousers with approved saw protection in carpenter's style. Generously proportioned bib and back for improved freedom of movement. Three zipped pockets and a wide elasticated waist. Front section of extra durable Cordura nylon, the rest of 100% Ultra polyester. Fulfil requirements of EN 340 class 1, 20 m/s. Approved for industrial wash.

Our standard protective trousers with approved saw protection. Made of durable polyester. Two front pockets and one zipped rear pocket. Fulfil requirements of EN 340 class 1, 20 m/s. Also available with extra long legs (+10 cm). Model A.

Our standard protective trousers with approved saw protection in carpenter's model. Made of durable polyester. Two front pockets and one zipped rear pocket. Adjustable braces. Fulfil requirements of EN 340 class 1, 20 m/s. Model A.

Protective trousers Basic is our most basic modelin our assortment. Made of 100% knitted polyester, which provides for good ventilation. Elasticated waist and two front pockets. Model A.

Our standard protective trousers with approved saw protection in front and back. Made of durable polyester. Two front pockets and one rear pocket with zip. Fulfil requirements of EN 340 class 1, 20 m/s. Model C.

Excellent protection for the occasional chainsaw user. Adjustable waist and zip at back of legs for easy removal. One size. Model A. Fulfils requirements of EN 340 and class 1, 20m/s.

Flourescent orange jacket with saw protection on the upper part of the sleeves, chest and shoulders. Outer material of 100% Ultra polyester. Full-length zip, extended back and elasticated wrist with press studs. Fulfils requirements of EN 381-10 and 11 class 1, 20 m/s.

Waistcoat in fluorescent yellow/orange with 50 mm wide reflectors. 100% polyester. Press studs at front.

Carpenter's trousers in fluorescent orange with saw protection. Two front pockets and one rear pocket. Outer fabric 70% polyester and 30% cotton. Two turns of 75 mm wide reflector around each leg. CE approved as hazard garment EN 471, class 2. Class 3 when worn together with protective vest. Model A.

All-weather jacket of fabric that is water resistant but still offers a degree of ventilation. Two zipped front pockets. Adjustable elasticated sections at waist and at base of back. Mesh lining throughout, taped seams and cuffs with zip and gusset.

Trousers in same material as the jacket. Elasticated waist and drawstring. Fulfils requirements of EN 343.

‘Tail-coat’ style with adjustable buttoning at front and extra-long sleeves with press studs.Tear resistant, waterproof and condensation-free flexothene fabric with sealed seams. Extended back with rain channel. If you use a clearing saw, wear harness underneath. One size. Fulfils requirements of EN 343.

Rain jacket of stretch polyester. Welded seams, full-length zip, press studs and mobile phone pocket. Extra durable material on front. Collar lined with corduroy. Adjustable cuffs. Fulfils requirements of EN 343.

Rain trousers of stretch polyester, with reinforced front. Welded seams, adjustable elasticated waist and zip at bottom of trouser leg. Fulfil requirements of EN 343.

Good-looking black micro-fleece jacket with embroidered Jonsered logo.Wind- and waterrepellent membrane on inside. Two front pockets and adjustable, elasticated bottom.

Underwear of two-layers of polyester and cotton. The polyester layer transports moisture to the cotton layer, where it evaporates. The shirt features a medium high neck and zip.

Spacious bag in strong Cordura nylon. Wide and strong carrying strap. Two straps over the top for better adjustment. One large side pocket with strong zipper. Bottom made of plywood.

Backpack of tough nylon. Three external pockets, volume 30 litres.

Leather belt with strong buckle.

Width: 5 cm

Width: 5 cm.

Practical new chainsaw bag in Cordura nylon, with a nice Jonsered design.

Full sized male (185 cm) and female (178 cm) mannequins. Body made of fiber glass and hands of PVC. The upper and lower part of body can be seperated for easy dressing. A smart foot stand that are attached to the calf helps the mannequins to stand up.